HP R4.2 - Manual (Page 75)

2
UNIX Administration Backup Scheduling, Setup and Control
UCS 1000 R4.2 Administration 585-313-507 Issue 3 April 2000 36
~ Type two numbers separated by a hyphen to indicate a range of days.
For example, type 14-20 to instruct the system to perform a backup
every day from day 14 through day 20 of the month.
~ Press F 2 (Choices) and press F 2 (Mark) to select one or more days.
Press F 3 (Enter) to save the selected day or days and return to the
Day(s) of the Month: field.
The default is “all,” to back up all days of the month.
5 Use one of the following methods to enter a value in the Day(s) of the
Week: field:
~ Type the first letter of the day to indicate a single day of the week, or
Press
F 2 (Choices) to select a single day from a menu.
Note: Sunday is Su and Thursday is Th . Every other day of the week is
indicated by its first letter.
~ Type two days, separated by a hyphen to indicate a range of days. For
example, type M-Th to instruct the system to perform a backup every
Monday, Tuesday, Wednesday, and Thursday.
~ Press F 2 (Choices) and press F 2 (Mark) to select one or more days.
Press F 3 (Enter) to save the selected day(s) of the week and return to
the Day(s) of the Week: field.
The default is “all,” to back up all days of the week.