HP R4.2 - Manual (Page 655)

A
Summary of Commands vsdisable
UCS 1000 R4.2 Administration 585-313-507 Issue 3 April 2000 616
The fifth block of information describes each destination bit specified in
the destination bit mask, starting with the lowest order bit.
Example
lComp
See Also
logCat
logDstPri
vsdisable
The vsdisable command disables the automatic restarting of the voice
system.
Synopsis
vsdisable
Description
The vsdisable command is used to prevent the voice system from being
started when the system is rebooted. Running vsdisable allows you to log
into the system before the voice system is started. The voice system may be
started manually at any time with the start_vs
command.