HP R4.2 - Manual (Page 159)

3
Voice System Administration Voice Equipment
UCS 1000 R4.2 Administration 585-313-507 Issue 3 April 2000 120
! CAUTION:
Be careful when making assignments and reassignments. Assignments
made in the Assign Functions to SSP Cards window overwrite any other
assignments that are currently in effect on the specified circuit cards.
2 Enter a single number or press F 2 (Choices) to select from a menu in the
Card Number: field. After entering the card number, the current settings
are displayed.
3 In the remaining fields, enable the function with Yes or disable with No.
The optional feature packages shown below may or may not appear in
the Assign/Change Functions to SSP Cards window, depending on the
software installed on your voice system.
All of these functions can be used in combination with one another. To
assign a function, the software package supplying that function must be
installed on the voice system.
! CAUTION:
You CANNOT assign the same function to both an LSPS and an SSP card.
Note: If you move a speech function (such as play, code, echo
cancellation, WholeWord, FlexWord, or Text-to-Speech) from an
SSP card to an LSPS II card, or vice versa, you must stop and
start the voice system for the change to take effect. If you do not,
the voice system will continue to use the former assignment.