HP R4.2 - Manual (Page 301)

6
Peripheral Administration Modem Administration
UCS 1000 R4.2 Administration 585-313-507 Issue 3 April 2000 262
16 Press F 2 (Select).
The LCD displays the baud.
17 Press the single .
Modem response:
Edit StrapGroup
18 Continue with the next procedure, Setting the Error Control Mode to
Buffer Mode on the 3820 Modem on page 262 . Do not return to the
top-level menu.
Setting the Error Control Mode to Buffer Mode on the 3820 Modem
To set the error control mode to buffer mode:
1 Press or to display V42/MNP/Buffer .
2 Press F 1 (Edit).
Modem response:
Err Control Mode
3 Press or to display BufferMode .
4 Press F 2 (Select).
5 Press F 1 (Next) to display Flw Cntl of DTE .