HP R4.2 - Manual (Page 481)

A
Summary of Commands display channel
UCS 1000 R4.2 Administration 585-313-507 Issue 3 April 2000 442
• t1 —This options displays all channels assigned on T1 cards.
• sp — This options displays all channels assigned to SSP service.
• netoos — This options displays all channels assigned to network service.
• hwoos — This options displays all channels assigned to hardware
service.
• foos — This options displays all channels assigned to facility service.
If more than one option is used, the system displays only channels that
satisfy all the options given. If an invalid combination of options is given, the
system displays an error message.
Examples
The following example displays information for channel 1.
disp channel 1
The following example displays information all channels being used by the
TSM process.
disp channel tsm
The following example displays information on all channels.
disp channel all