HP R4.2 User Manual
Page 190
4
Switch Interface Administration
Digital Interfaces
UCS 1000 R4.2 Administration 585-313-507
Issue 3 April 2000 151
The system displays the T1 A/B Robbed-bit E&M menu (
Figure 88
).
Figure 88.
T1 A/B Robbed-bit E&M Menu
Assigning T1 A/B
Robbed-bit E&M to
Digital Circuit Cards
Note:
Before a new protocol can be assigned to a circuit card, any
existing protocol must first be
unassigned
A/B Robbed-bit E&M to Digital Circuit Cards on page 161
below
for more information.
Before attempting to make any assignment changes to circuit
cards, they must be in the MANOOS state. See
on page 103
in
Chapter 3, Voice System Administration
, for more
information.
If you change digital protocol assignments on the voice system,
you must also make the change on the switch.