HP R4.2 - Manual (Page 298)

6
Peripheral Administration Modem Administration
UCS 1000 R4.2 Administration 585-313-507 Issue 3 April 2000 259
Setting the Async DTE Rate
To set the Async DTE rate to the required speed:
1 Press or on the modem to display Configure .
2 Press the function key under Configure ( F 1 or F 2 ).
Modem response:
Ld EditArea frm.
3 Press or to display Active .
4 Press F 1 (Save).
Modem response:
Choose Function
Edit and Save
5 Press F 1 (Edit).
Modem response:
Edit StrapGroup
DTE Interface
6 Press F 1 (Edit).
Modem response:
Async/Sync Mode