HP R4.2 - Manual (Page 597)

A
Summary of Commands remove
UCS 1000 R4.2 Administration 585-313-507 Issue 3 April 2000 558
To delete out of the command, press D E L E T E . If this does not stop the
command, you may need to press C ON T R OL and backslash simultaneously.
If, while running remove, you want to abort the command, a message similar
to the following may appear:
At the user’s request, administration of the following
cmd(s) has been interrupted.
CARD NUMBERS: <card numbers>
To assure proper operation of the identified card(s),
run diagnostics at the earliest opportunity.
When remove is aborted, you should run diagnostics on all cards being
administered to ensure they are returned to a fully functional state.
Example
The following example removes card 0 from service.
rem card 0
The following example removes channels 0 through 2 and channel 4 from
service.
rem channel 0-2,4
The following example removes all cards from service.
rem card all