Unassigning the – HP R4.2 User Manual
Page 211
Advertising
4
Switch Interface Administration
Digital Interfaces
UCS 1000 R4.2 Administration 585-313-507
Issue 3 April 2000 172
Unassigning the Digital R2 MFC - Mexico Protocol to E1 Circuit Cards
Note:
Before attempting to make any assignment changes to circuit
cards, they must be in the “manoos” state. See
on page 103
in
Chapter 3, Voice System Administration
, for
additional information.
To unassign the Digital R2 MFC - Mexico protocol:
1
Start at the Digital R2 MFC Protocol - Mexico menu (
Figure 93 on page
164
) and select:
The system displays the Unassign Card: Digital R2 MFC Protocol -
Mexico window (
Figure 97 on page 173
).
> Unassign Card
Advertising