Changing switch system parameters – HP R4.2 User Manual
Page 230
Advertising
4
Switch Interface Administration
Changing Switch System Parameters
UCS 1000 R4.2 Administration 585-313-507
Issue 3 April 2000 191
Changing Switch System Parameters
To change the switch system parameters:
Note:
You must stop the voice system before changing the switch
system parameters.
1
Start at the Switch Interfaces menu (
Figure 85 on page 143
)and select:
The system displays the Change Switch System Parameters window
(
Figure 103
).
Figure 103.
Change Switch System Parameters
> Change Switch System Parameters
Advertising