HP R4.2 - Manual (Page 633)

A
Summary of Commands spVrsion
UCS 1000 R4.2 Administration 585-313-507 Issue 3 April 2000 594
spVrsion
The spVrsion command prints the version of the SSP driver currently
installed on a machine.
Synopsis
spVrsion
Description
The spVrsion command prints which version of the SP driver is installed.
This can be either the 12-MB version or the 44-MB version.
start_vs
The start_vs command brings the system up to a fully operational state.
Synopsis
start_vs
Description
The start_vs command returns the voice system software to fully operational
state. If you use the stop_vs command to stop the system, you should use