HP R4.2 - Manual (Page 623)

A
Summary of Commands spStatus
UCS 1000 R4.2 Administration 585-313-507 Issue 3 April 2000 584
-b SP-index Index of the SP card to be examined.
-i interval Interval between examinations of SP status
Minimum interval is 2 seconds. The default is 60
seconds
-c count Number of times SP status is to be examined. The
default is 1.
-r Reset the executive and task counts before starting.
-B No bell when running in iterative mode.
The spStatus command can be run in once, which is the default, or an
iterative mode. In the iterative mode, it prints the changes between each
successive examination of the values stored in the spcon structure in shared
memory.
Sample Format
The following is an example of the sample output if spStatus is against the
CCA pack.
Fri Dec 7 13:06:03 1999
Romstate: 0x0 Romcmd: 0x0 Romargs: 0x0 0x0
Ramstate: 0x245 Pack Features: C Pack Type: SP executive
Bootcnt: 0x0 SPtime: 0x6a5 SPusage: 0x0
Debug ID: 0 spFreeMemory: 1,164,152
<< Status Information >>