HP R4.2 - Manual (Page 214)

4
Switch Interface Administration Digital Interfaces
UCS 1000 R4.2 Administration 585-313-507 Issue 3 April 2000 175
Figure 98. ISDN-PRI Layer 1 Menu
Assigning an ISDN-
PRI Layer 1 to
Digital
Circuit Cards Note: Before a new protocol can be assigned to a circuit card, any
existing protocol must first be
unassigned . See Unassigning T1
A/B Robbed-bit E&M to Digital Circuit Cards on page 161 for more
information.
Before attempting to make any assignment changes to circuit
cards, they must be in the MANOOS state. See
Equipment State
on page 103 in Chapter 3, Voice System Administration , for
additional information.
If you change digital protocol assignments on the voice system,
you must also make the change on the switch.