HP R4.2 - Manual (Page 142)

3
Voice System Administration Voice Equipment
UCS 1000 R4.2 Administration 585-313-507 Issue 3 April 2000 103
Note that background speech plays at a lower volume than
foreground speech.
3 Enter circuit card or channel in the Equipment: field, or press F 2
(Choices) to select from a menu. If you specify a circuit card, the option is
set for all channels of that circuit card.
4 Enter a single number or range of numbers to select the voice circuit
cards or channels to change in the
Equipment Number: field, or enter all
(default).
5 Press F 3 (Save).
The system saves the voice equipment options.
Equipment State
The equipment states, listed below, indicate to the voice system whether or
not a voice circuit card/channel is ready and able to receive calls, process
speech, and so on.
Note: Cards in the NONEX state (that is, those that have been
physically removed from the system, or have been "detached"
using the detach command) do not show up in Display Voice
Equipment window.
The Change Equipment State menu option allows you to change the state, or
maintenance state, of a card or channel. Some states are valid only for cards