HP R4.2 - Manual (Page 621)

A
Summary of Commands spsav
UCS 1000 R4.2 Administration 585-313-507 Issue 3 April 2000 582
Description
The spsav command backs up the specified talkfile number, phrase number,
listfile, or phrase and talkfile of the speech. Only speech in the speech file
system can be backed up using the spsav command.
The parameters for the spsav command are as follows:
• -O file — This parameter specifies the output device. Typically, this is
cartridge tape (/dev/rmt/c0s0).
• -v — This parameter is the verbose flag that gives a running
commentary of speech being saved.
• -t — This parameter is the tape flag. This is required for back
up to cartridge tape.
• [talkfile <list>] — This parameter specifies the list of talkfiles to be
backed up, specified as a single digit, a range m-n, or the word all. If no
value is given, the default is all.
• [phrase <list>] — This parameter specifies the list of phrases to be
backed up, specified as a single digit, a range m-n, or the word all. If no
value is given, the default is all.
• [listfile <list>] — This parameter specifies the list of listfiles and
associated speech to be backed up, for example, listfile list.cabnt.