HP R4.2 - Manual (Page 684)

Glossary DCP
UCS 1000 R4.2 Administration 585-313-507 Issue 3 April 2000 645
DCP
digital communications protocol
debug
The process of locating and correcting errors in computer programs; also referred to
as
troubleshooting .
default
The way a computer performs a task in the absence of other instructions.
default owner
The owner of a channel when no process takes ownership of that channel. The
default owner holds all idle, in-service channels. In terms of the IRAPI, this is
typically the Application Dispatch process.
diagnose
The process of performing diagnostics on a bus or on Tip/Ring, E1/T1, or SSP circuit
cards.
dial ahead
The ability to collect and process touch-tone inputs in sequence, even when they are
received before the prompts.