HP R4.2 - Manual (Page 474)

A
Summary of Commands display card
UCS 1000 R4.2 Administration 585-313-507 Issue 3 April 2000 435
display card
The display card command displays information about specified cards.
Synopsis
disp[lay] card [option [option] ]
Description
The display card command displays data about a specified card or about
cards in a specified state. In the output, the physical slot number, the
osindex, and the voice system card number are all the same. The output also
correctly reflects which card is primary master, which is secondary master,
and which cards are slave.
The display card command options are:
• card# port# — Displays information on card card# and on port port# of
the specified card. All ports are shown if port# is not given. A range of
cards may be specified in the form m–n without using the port# option.
• all — Displays information on all cards.
• t1 — Displays all T1 cards.
• sp — Displays all SSP cards.
• lsps — Displays all LSPS cards.