HP R4.2 - Manual (Page 660)

A
Summary of Commands wl_edit
UCS 1000 R4.2 Administration 585-313-507 Issue 3 April 2000 621
Audible playback is provided with Text-to-Speech so that you can hear the
pronunciation of any word. You must dial into the channel specified with the -
l option to hear the pronunciations.
Error messages are written to a small window at the bottom of the screen.
Error messages are also logged to the file /usr/tmp/wledit.output.
The -s <ssp#> argument is used to specify which SSP circuit card to use for
speech playback. Circuit cards are referenced by O.S. index displayed in the
display card command.
The -L language argument is used to specify the language output that
appears on the screen.
The -D directory argument is used to specify that the program will start in the
given directory.
The -O option is for debugging purposes. It causes certain events to be
recorded in the output window.
The -I option inhibits forced initialization of the SSP circuit cards. The wl_edit
command usually determines if the cards need to be reset and provides a
forced initialization. The advantage of using this option is that the FlexWord
Editor comes up faster. The disadvantage is that in some unusual situations
you may not be able to hear the pronunciation of your words. If this happens,
run wl_edit again without specifying the -I option.