HP R4.2 - Manual (Page 225)

4
Switch Interface Administration Digital Interfaces
UCS 1000 R4.2 Administration 585-313-507 Issue 3 April 2000 186
Unassigning ISDN-
PRI Layer 1 Card Note: Before attempting to make any assignment changes to circuit
cards, they must be in the MANOOS state. See
Equipment State
on page 103 in Chapter 3, Voice System Administration , for
additional information. If you change digital protocol assignments
on the voice system, you must also make the change on the
switch.
To unassign the ISDN-PRI Layer 1 protocol to a digital circuit card:
1 Start at the ISDN-PRI Layer 1 menu ( Figure 98 on page 175 ) and select:
The system displays the Unassign Card: ISDN-PRI Layer 1 window
(
Figure 102 on page 187 ).
> Unassign Card