HP R4.2 - Manual (Page 415)

A
Summary of Commands assign card/channel
UCS 1000 R4.2 Administration 585-313-507 Issue 3 April 2000 376
Synopsis
assign card <card [.port]> to [eqpgrp] <group number> [grpname]
assign channel <number> to [eqpgrp] <group number> [grpname]
Description
The assign card/channel command is used when a system is installed, the
number of channels or cards changes, scripts are added or deleted,
telephone numbers change, or the user wants to reconfigure the system. The
system uses the card and channel assignments to route an incoming call to
the group.
The parameters that can be used with the assign card/channel command
are:
• number — The channel number (a single card or channel number, a
range of card or channel numbers specified m–n, or the word “all’ for all
card or channel numbers)
• eqpgrp — The “eqpgrp” when assigning to an equipment group
• group number — The number of the equipment group or service group
• grpname — An optional character string that can be associated with
“grp’“
Reference to a nonexistent channel or nonexistent group in this command
causes it to fail.