HP R4.2 - Manual (Page 531)

A
Summary of Commands iCk, iCkAdmin
UCS 1000 R4.2 Administration 585-313-507 Issue 3 April 2000 492
• quit
This command causes the iCk daemon to exit gracefully. (Since iCk is
normally run from the /etc/inittab file, init immediately respawns the
daemon.) In interactive mode, the command requires confirmation.
• verbosity {value}
This command sets the iCk daemon’s verbosity flags to the specified
values. In this case, the symbolic names are accepted as well as octal,
decimal, or hexidecimal values. Combined values can be produced by
separating values with the pipe (|) character.
• activate {spec}
This object, in conjunction with the V_TRACE flag, causes the activities
specified by
{spec} to be logged whenever they execute.
• inhibit {spec}
This object, in conjunction with the V_TRACE flag, causes the activities
specified by
{spec} not to be logged whenever they execute.
• print {spec}
This object logs the status of the activities specified by {spec} . The status
information logged as a result of the print command varies based on the
activity. The common information printed is the activity index, which may
be used in future
{spec} ‘s, the rule index, which should correspond to the
position of the rule in the rules file, and the type of the activity. In addition,