Nortel Networks 9150 - Manual (Page 127)

Remote Gateway 9150 Installation and Administration Guide 97
January 2005 Installing the Remote Gateway 9150 unit
Installing a module
4 Align the connectors on the module with the connectors on the Remote
Gateway 9150 unit circuit board.
5 Use both hands to grasp the module firmly and push down until it snaps
into place.
6 Visually inspect the module connectors to ensure there is no gap between
the module connectors and the Remote Gateway 9150 motherboard
connectors.
7 Ensure that the module is securely installed by placing one finger beneath
the module and tugging upward gently. When correctly installed, this action
does not move the module.
Connector
on module
Connector
on mother board
G101404
Dongle socket
(not used)