Nortel Networks 9150 - Manual (Page 208)

178 Remote Gateway 9150 Installation and Administration Guide
Configuring the Remote Gateway 9150 unit Standard 3.1
9150 System Configuration field descriptions
Field Description
Unit ID Enter a unique number from 1 through 20 to identify this
Remote Gateway 9150 unit and differentiate it between the
RLC and all remote units connected to the same RLC.
Note: This is the same number that you enter in the Unit
ID field of the RLC's Remote Connection Configuration
property sheet for this Remote Gateway 9150 unit.
The default is 1.
Node Name Enter your site name.
The node name uniquely identifies this Remote Gateway
9150 site in the RLC network.
The default is 9150.
DSP Gain Configure the DSP Gain if the voice levels at the distant
site are too loud or quiet and cannot be resolved using the
volume control on the telephone set. Positive values for
the gain boosts the voice level for all remote calls to the
distant site. Negative values for the gain reduce the voice
level at the distant site for all remote calls.
Select the number of decibels (dB) that you want to add to,
or subtract from, the strength of the transmitted signal
before the DSP processes it.
Valid options are 9, 6, 3, 0, -3, -6, -9, -12, and -15.
The default is 0 dB.