Verifying the firmware and software version, Verifying the software version – Nortel Networks 9150 User Manual
Page 365
Remote Gateway 9150 Installation and Administration Guide
335
January 2005 Administration
Verifying the firmware and software version
This section describes how to determine the version of firmware and software
currently installed.
Before you perform a firmware or software upgrade, determine what version is
currently installed. This ensures that you do not replace the installed firmware or
software with an older version.
Verifying the software version
To verify the software version on your Remote Gateway 9150 unit:
1
From the Menu Bar, choose Help
→
About Configuration Manager.
Result: The About Configuration Manager dialog box displays, similar to
the following:
2
Review the About Configuration Manager dialog box. This identifies the
version of software installed on the unit.
3
Click on the OK button.