Nortel Networks 9150 - Manual (Page 73)

Remote Gateway 9150 Installation and Administration Guide 43
January 2005 Remote Gateway 9150 description
Administration software
Configuration and administration of the Remote Gateway 9150 unit is
performed with Configuration Manager software, a Windows-based application
that is installed on your PC.
The software is provided on the Remote Gateway 9100 Series Product CD-
ROM. You can obtain the CD from your Nortel distributor or click on the
Support link at the following website:
www.nortel.com
Administration PC connection options
You can connect the administration PC to the Remote Gateway 9150 unit
through the following:
!
an RS-232 connection to the administration PC’s serial port
!
a 10BaseT Ethernet interface connection
Remote Gateway 9100 Series Configuration Manager
Remote Gateway 9100 Series Configuration Manager allows you to configure
the Remote Gateway 9150 unit. It also provides the Configuration Wizard for
first-time configuration. The Configuration Wizard prompts you for the
minimum information that is needed to get the Remote Gateway 9150 unit
communicating with the RLC on the host PBX. After the initial configuration is
completed, use Configuration Manager to administer the Remote Gateway 9150
unit. Administration tasks include the following:
!
viewing the system status
!
performing upgrades, backups, or restores
!
making configuration changes
!
changing the administration password
Note: Configuration Manager alerts you when you must restart after you have
made a configuration change.