Nortel Networks 9150 User Manual
Page 385
Remote Gateway 9150 Installation and Administration Guide
355
January 2005 Troubleshooting
Incoming calls are not being
received from the host PBX.
(continued)
6
Check the IP network (if it is being used)
and ensure that:
!
it is not down
!
traffic is being routed between the
Remote Gateway 9150 unit and RLC
on the host PBX
7
PING the RLC from the Remote
Gateway 9150 unit to verify IP network
connectivity.
8
If the problem persists, contact your
telecom administrator or Nortel
distributor.
Incoming calls are not being
received from the PSTN.
1
Ensure your telephone is not on call
forward.
2
Ensure the calling party has your office’s
correct telephone number.
3
Ensure the Remote Gateway 9150 unit
is powered up. It cannot receive calls
from the host PBX or the PSTN if it is not
powered up.
4
Ensure the ISDN BRI line is working.
Ask your service provider to check this.
5
If the problem persists, contact your
telecom administrator or Nortel
distributor.
A call in progress was suddenly
disconnected.
1
Does your telephone display “Offline
Mode?” If so, enter the Online SPRE
code to go back online.
2
Contact your telecom and data network
administrators. Perhaps network
problems caused the call to drop.
Symptom
What to do