Nortel Networks 9150 - Manual (Page 170)

140 Remote Gateway 9150 Installation and Administration Guide
Using Configuration Manager Standard 3.1
Check boxes
Fields that contain a blank box beside them are called check boxes. These check
boxes are used to enable or disable the feature associated with that field. To
enable the feature, click on the check box. A check mark displays. When you
click on the check box again, the check box clears (thereby disabling the
feature).
Option buttons
Some fields have multiple options. There is a circle beside each option that is
called an option button. For these fields, you can only select one option.
To enable an option, click on its associated option button. If you change a
previously selected option, the previously selected option button clears.
In some cases, selecting a particular option button causes the property sheet
contents to change as follows:
!
When a field is dimmed (disabled), it cannot be configured in the context of
the option you selected.
!
Other fields are re-enabled (no longer dimmed).
!
One or more values on the property sheet are replaced with values that are
specific to the option you selected.