Nortel Networks 9150 - Manual (Page 27)

Remote Gateway 9150 Installation and Administration Guide xxiii
January 2005 About this document
Instructions for selecting menu options
To simplify the instructions for selecting menu options, this guide abbreviates
the selection path. For example, if you must choose Over IP from the PSTN
Connectivity menu, under the Tests menu, this guide uses the following style:
From the menu, choose Tests → PSTN Connectivity → Over IP.
Instructions for displaying property sheets
To simplify the procedures for accessing property sheets throughout this guide,
the instructions for displaying a particular property sheet are summarized in a
“Getting there” statement.
The procedure for displaying the screen that you need depends on if you are:
!
performing an online configuration (connected to a node by serial port or
Telnet)
!
performing an offline configuration (not connected to a node)
Example
Getting there 9150 → Configuration Manager → IP Configuration
The long instruction for this example is as follows:
1 Do the following:
2 In the left pane, click on the plus sign (+) beside Configuration Manager to
expand the node list.
3 Click on IP Configuration.
Result: The IP Configuration property sheet for the Remote Gateway 9150
unit displays in the right pane.
IF THEN
you are performing an offline
configuration, select the device type as described in
“Selecting the device type for offline
configuration” on page 156.
you are performing an online
configuration, connect to, and then log on to the node
as described in “Logging on to a unit” on
page 157.