Nortel Networks 9150 - Manual (Page 240)

210 Remote Gateway 9150 Installation and Administration Guide
Configuring the Remote Gateway 9150 unit Standard 3.1
Local Profile Configuration field descriptions
Field Description
CPND Enter the Calling Party Name Display (CPND) for the user
assigned to the station.
The default is NC (Not Configured).
DN Enter the user’s local extension number.
Note: If Auto DN Discovery is enabled on the RLC, then this field
is configured to be the same DN as the primary DN configured on
the host PBX for this station.
Phone Type Select the telephone model type connected to the port.
Valid options are M2006, M2008, M2216, M2616, M2616CT,
M3110, M3310, M3820, M3901, M3902, M3903, M3904,
M3905, MCA, ATA, and Other.
The default is M2616.
Add on Module
Type Select the applicable Add on Module for the M3904 and M3905
telephones.
Valid options are Not Configured, KBA, and DBA.
The default is Not Configured.
Auto Hold
!
Click on the Enable option button if active calls are to be
automatically put on hold when another call appearance key is
pressed.
!
Click on the Disable option button if active calls are to be
disconnected when another call appearance key is pressed.
The default is Enable.
Paging
!
Click on the Enable option button if this station is to be
allowed to announce pages.
!
Click on the Disable option button if this station is not to be
allowed to announce pages.
The default is Enable.