Nortel Networks 9150 - Manual (Page 92)

62 Remote Gateway 9150 Installation and Administration Guide
Planning for Remote Gateway 9150 unit installation Standard 3.1
Windows PC requirements
To use Configuration Manager, the administration PC must:
!
be an IBM-compatible PC
!
use a Windows 95, 98, NT Workstation 4.0, Millennium Edition (ME),
2000 Professional, or XP (Professional and Home Edition) operating
system with the Microsoft TCP/IP networking component installed
!
be equipped with a CD-ROM drive
!
be equipped with a 10BaseT Ethernet interface card (this provides access to
the Ethernet network)
!
have an available COM port if you wish to use the RS-232 serial port to
establish a direct serial connection
!
be equipped with a pointing device, such as a mouse
!
have 32 Mbytes of RAM for Windows 95, 98, and ME, or 64 Mbytes of
RAM for Windows NT Workstation 4.0, 2000 Professional, and XP
(Professional and Home Edition
!
have 48 Mbytes of available storage for Windows 95, 98 and ME, or 64
Mbytes of available storage for Windows NT Workstation 4.0, 2000
Professional, and XP (Professional and Home Edition)
Note: Configuration Manager does not support any of the Win32 Server
versions of Microsoft Windows.
Trivial File Transfer Protocol (TFTP) server
Firmware upgrades and configuration uploads require that the administration PC
have a TFTP server application installed. The administrator must know the
TFTP server’s IP address in the network. In other words, the IP address of the
administration PC.
You can use any TFTP server application. These applications are available free
of charge on the Internet.