Trunk group configuration – Nortel Networks 9150 User Manual
Page 262
Advertising
232
Remote Gateway 9150 Installation and Administration Guide
Configuring the Remote Gateway 9150 unit
Standard 3.1
Trunk group configuration
This section explains how to enable and create trunk groups for use with the
Remote Gateway 9150 unit and how to configure your trunks to either connect
with the RLC at the host site or to place calls through the local PSTN. For more
information, refer to “Trunk groups” on page 234 and “Trunk access codes” on
page 234.
Getting there
9150
→
Configuration Manager
→
Trunk Group Configuration
Trunk Group Configuration property sheet
Advertising