Nortel Networks 9150 - Manual (Page 164)

134 Remote Gateway 9150 Installation and Administration Guide
Using Configuration Manager Standard 3.1
What is Configuration Manager?
Configuration Manager is a Windows-based software application that you install
on your PC. Configuration Manager allows you to configure, administer, and
upgrade the RLC. These tasks can be performed over either of the following
connection types:
!
10BaseT Ethernet
!
RS-232 serial
Note: It is not possible to use Configuration Manager to configure a
Remote Gateway 9150 unit over a modem connection.
The CD shipped in the RLC package includes the Configuration Manager
software. You can obtain the CD from your Nortel distributor or click on the
Software Downloads link at the following website:
www.nortel.com
For the required characteristics of the Meridian administration PC, refer to
“Windows PC requirements” on page 62.
To install the Configuration Manager software on your administration PC, refer
to “Installing the Configuration Manager software” on page 113.
ATTENTION!
Complete all Remote Gateway 9150 unit configuration
using Configuration Manager. Only use the man-machine
interface (MMI) with the assistance of technical support
personnel for troubleshooting and diagnostic testing.