Nortel Networks 9150 - Manual (Page 329)

Remote Gateway 9150 Installation and Administration Guide 299
January 2005 Administration
Bandwidth Connection Statistics field descriptions
The following table describes the statistics on the Bandwidth Connection
Statistics screen:
Column Description
Remote Unit Number Identifies the remote unit that initiated the call.
Signaling Status Identifies whether a connection is up on this unit.
Valid values are Active and Idle.
No of Voice Calls on
IP Identifies the number of calls in progress on this unit’s
IP connection.
No of Voice Calls on
PSTN Identifies the number of calls in progress on this unit’s
PSTN connection.
Used IP BW Identifies the IP bandwidth in use on this unit.
Used Trunk BW Identifies the PSTN bandwidth in use on this unit.
Total Up Trunk BW Identifies the total PSTN bandwidth up and available to
this unit.
IP QoS Status Identifies the Quality of Service (QoS) level on this
unit’s IP connection.
Valid values are Good and Bad.