Nortel Networks 9150 - Manual (Page 138)

108 Remote Gateway 9150 Installation and Administration Guide
Installing the Remote Gateway 9150 unit Standard 3.1
Attaching the cables to Remote Gateway 9150 unit
Nortel recommends that you use straight-through Amphenol cables instead of
side-entry Amphenol cables, as shown in the following diagram:
Note: The Remote Gateway 9150 Telco 1 and 2 connections provide the
opposite gender of the connections on Meridian 1 PBX IPE or Meridian 1 PBX
11 cabinet line card slots. Therefore, you must use different cables when
connecting to the Remote Gateway 9150 unit than the cables you use to connect
to Meridian 1 PBX line cards.
G101399
Telco 1
Ethernet
Telco 2
Power
Admin
Cables must be connected and routed
away from the 9150 unit at a right angle