50 configuration information—dialing plans, Configuration information—dialing plans, Remote gateway 9150 – Nortel Networks 9150 User Manual
Page 414
384
Remote Gateway 9150 Installation and Administration Guide
Planning forms
Standard 3.1
Remote Gateway 9150
Configuration Information—Dialing Plans
Page 1 of 1
Notes:
!
Nortel recommends that you use the pre-configured default codes listed below.
!
The pound sign (# in North America) is mandatory and is automatically pre-configured in
Configuration Manager. The pound sign prevents conflicts with the dialing plan on the host
PBX.
!
You can dedicate all B-channels to one trunk group. You do not have to create a trunk group
for each B-channel.
Description
Default code
Your code (maximum of 3 digits)
Online SPRE code
#99
#
Offline SPRE code
#98
#
Paging SPRE code
#05
#
Local Calling SPRE code
(for analog or ATA-equipped stations)
#8
#
Registration SPRE code
(for multi-user or dynamic pool ports only)
#97
#
De-registration SPRE code
(for multi-user or dynamic pool ports only)
#96
#
Access code for trunk group 1
#61
#
Access code for trunk group 2
#62
#
Access code for trunk group 3
#63
#
Access code for trunk group 4
#64
#
Access code for trunk group 5
#65
#
Access code for trunk group 6
#66
#
Access code for trunk group 7
#67
#
Access code for trunk group 8
#68
#