Nortel Networks 9150 - Manual (Page 207)

Remote Gateway 9150 Installation and Administration Guide 177
January 2005 Configuring the Remote Gateway 9150 unit
3 To update the Remote Gateway 9150 unit with the new information, click on
the Send button.
Note: When you change System configuration parameters and Save to
Flash, calls can be dropped. Ensure that there are no active calls when you
make changes to these parameters.
IF you are THEN
logged on to the
Remote Gateway 9150
unit, the changes are written into the Remote
Gateway 9150 unit’s buffer.
To save the changes in Flash memory,
choose Upload/Download
→ Save to
Flash from the Menu Bar.
not logged on to the
Remote Gateway 9150
unit, the Connection not Established dialog
box displays:
Do one of the following:
!
Log on to the Remote Gateway 9150 unit,
and then click on the Send button again.
!
Save the changes to a file on your
administration PC.