Nortel Networks 9150 - Manual (Page 206)

176 Remote Gateway 9150 Installation and Administration Guide
Configuring the Remote Gateway 9150 unit Standard 3.1
Emergency service programmability
The Remote Gateway 9150 unit can serve the emergency needs of telephones in
multiple locations having different dialing plans. To access the Emergency
Activation Code dialog box, click on the Emergency Feature button. You can
configure up to three separate numbers to reach local emergency services
regardless of which call appearance key you use to dial the number. The
particular emergency activation code dialed by the user determines the digits
sent to the host PBX and the telephone number sent to the Central Office (CO).
Also, in their haste to reach an emergency service, some users can forget to dial
trunk access digits. You can configure your Remote Gateway 9150 unit to send
the emergency telephone number to the CO whether or not the user dials trunk
access digits.
Note: If you must contact emergency personnel with consecutive calls, you must
press the digits of the Emergency Access Code each time. Do not use last
number re-dial or the auto-dial keys.
Refer to the “Emergency Feature” on page 180 for further configuration details.
Configuring the Remote Gateway 9150 system settings
To configure the Remote Gateway 9150 system settings:
1 Complete the fields as described in “9150 System Configuration field
descriptions” on page 178.
2 Click on the OK button to save the information in the temporary work file.