Nortel Networks 9150 - Manual (Page 311)

Remote Gateway 9150 Installation and Administration Guide 281
January 2005 Administration
2 Complete the fields in the Change Password dialog box.
3 Click on the OK button.
Result: The Password changed successfully dialog box displays.
4 Click on the OK button.
Changing the Remote Gateway 9150 unit password
To change the Remote Gateway 9150 unit (node) password:
1 From the Menu Bar, choose Connect → Change Password → Node.
Result: The Change Password displays, similar to the following:
2 Complete the fields in the Change Password dialog box.
3 Click on the OK button.
Result: The Board Password Changed Successfully dialog box displays.
Note: This means that Configuration Manager has written the password to
the Remote Gateway 9150 unit’s Flash memory.
4 Click on the OK button.
5 From the Menu Bar, choose Upload/Download → Save to Flash.
Result: Configuration Manager updates the Remote Gateway 9150 unit’s
memory with the new password.
6 Restart the Remote Gateway 9150 unit.
ATTENTION!
Do not change the Remote Gateway 9150 unit’s password
until the system is up and working.