Nortel Networks 9150 - Manual (Page 252)

222 Remote Gateway 9150 Installation and Administration Guide
Configuring the Remote Gateway 9150 unit Standard 3.1
Configuring the fax port
To configure the fax port:
1 Locate port 64.
2 On port 64, under Port Type, click on the option button of the call
processing capability the fax machine is to have:
!
Local: if only faxes through the local PSTN are allowed. This option
enables the Configure button for this port.
!
Remote: if only faxes through the host PBX are allowed.
!
Local and Remote: if both local and remote faxing are allowed. This
option enables the Configure button for this port so you can configure
local station features and keys.
3 Accept the default RLC Port assigned to this station, or enter a new RLC
port number.
Notes:
!
Generally, choosing matching Remote Gateway 9150 and RLC port
numbers simplifies configuration and administration.
!
For fax transmissions, the RLC port must be configured on the host PBX
with voice capability.