Nortel Networks 9150 - Manual (Page 70)

40 Remote Gateway 9150 Installation and Administration Guide
Remote Gateway 9150 description Standard 3.1
Online/offline table
The online/offline table is configured on the RLC and allows you to schedule
times
!
when the ISDN BRI connection to the host PBX is made available to the
Remote Gateway 9150 site
Note: When the Remote Gateway 9150 unit is in offline mode, users
cannot place or receive calls through the host PBX over the IP or PSTN.
!
when all telephones at the Remote Gateway 9150 site revert to normal
telephone service
This allows you to ensure that unwanted ISDN BRI telephone calls through the
host PBX are disabled after business hours.
How the table works
You can define up to eight entries per day, every day of the week, for each
remote site. You can define each entry as online, offline, or undefined for each
time period entered.
Users at the Remote Gateway 9150 site can override the settings of the online/
offline table, if the table attempts to suspend access to the host PBX in the
middle of a business call. Each user station at the remote site is alerted by a buzz
and a display message at 30, 20, and 10 seconds before the connection is
terminated. To override connection termination, the user must enter the online
SPRE (Special Prefix) code on the telephone.
Configuration
The online/offline table is configured for each remote site on the RLC. Refer to
the Reach Line Card Installation and Administration Guide
(NTP 555-8421-210) for configuration information.
For a description of how to go online or offline at the Remote Gateway 9150
site, refer to Chapter 6, “Using Remote Gateway 9150 stations.”