Nortel Networks 9150 User Manual
Page 500
470
Remote Gateway 9150 Installation and Administration Guide
Display log definitions
Standard 3.1
Statistic
Definition
LOG NUMBER
82
DESCRIPTION
This log indicates that Network Manager task states for a particular
remote unit was reset and all the connections to the remote were
cleared. This can happen due to the following reasons:
1) An error occurred in the system to automatically trigger Network
Manager reset.
2) The user has issued a debug command "nmr x" where x is a
valid remote unit number.
SEVERITY
MAJOR
TASK
Network Manager
PRODUCT
RLC, 9150, 911x
CANCELLATION
None
ACTION TO BE TAKEN
System usually works as normal after the log is displayed. If not,
contact technical support personal for help. If the log is displayed
too frequently, check if anyone is entering debug commands. If not,
contact technical support.
PARAMETERS
1) Remote unit
DISPLAYED TEXT
States reset in NM for Remote: P1