Nortel Networks 9150 - Manual (Page 504)

474 Remote Gateway 9150 Installation and Administration Guide
Display log definitions Standard 3.1
Statistic Definition
LOG NUMBER 86
DESCRIPTION This log indicates that a DSP failure was detected and automatic
dynamic recovery was initiated.
SEVERITY WARNING
TASK VPM
PRODUCT RLC, 9150
CANCELLATION None
ACTION TO BE TAKEN None
PARAMETERS 1) Single-digit DSP device ID
2) DSP module number
3) DSP device number
4) If the user manually initiates the request, the cause shows as User.
If the reload arose from detection of DSP failure and subsequent
automatic dynamic DSP recovery, the cause shows as Auto.
Note: If the DSP has already been taken out of service (OOS) due
to catastrophic failure, the code ignores the reload request and
leaves the DSP OOS.
DISPLAYED TEXT DSP #P1 reloading. (Mod, Dev) = (P2, P3) Cause: P4