Nortel Networks 9150 - Manual (Page 99)

Remote Gateway 9150 Installation and Administration Guide 69
January 2005 Planning for Remote Gateway 9150 unit installation
When a station is configured with local control capability, further configuration
of the station is required to:
!
enable or disable certain features
!
disable outgoing calls or single-digit dialing, if required
!
define key placement on the telephone
User extension configuration
Each station is assigned a local directory number (DN). The Remote Gateway
9150 unit uses the DN to route the incoming call to the correct station.
Stations that are configured with host-controlled call capability are associated
with a port number on the RLC. The RLC and the Remote Gateway 9150 unit
use this port number to establish the communication path between the host PBX
and the station.
Placement of local call appearance and feature keys
When determining the placement of the local call appearance key on a station,
ensure that the key position is not already configured for a specific feature on the
host PBX. If you configure a PBX-configured feature key as a local call
appearance key, the user cannot use that feature.
If the station is configured with local control capability, you can also configure
the placement of other keys, such as Transfer, Call Waiting, and Make Set Busy.