Nortel Networks 9150 - Manual (Page 391)

Remote Gateway 9150 Installation and Administration Guide 361
January 2005 Troubleshooting
CONFIG UPLOAD FAILED
when
attempting to perform a
configuration upload by TFTP.
(continued)
2 Ensure that the configuration file you are
attempting to upload is compatible with
current Remote Gateway 9150 firmware.
Perform the configuration upload using a
previous configuration file, if necessary.
Note: Each time you perform a Remote
Gateway 9150 firmware upgrade, create a
backup of the configuration. The
configuration database format in the
Remote Gateway 9150 unit is dependent
on the version of firmware installed on the
Remote Gateway 9150 unit. If you
recently downgraded to a previous version
of Remote Gateway 9150 firmware, you
might also need to revert to a previous
configuration format.
System not responding
displays when working with
Configuration Manager.
It is possible that communication has been
lost between the administration PC and the
Remote Gateway 9150 unit.
Close Configuration Manager, and then
restart it.
Nothing happens when
attempting to log off from the
Remote Gateway 9150 unit. It is possible that communication has been
lost between the administration PC and the
node you were logged on to.
Close Configuration Manager, and then
restart it.
Symptom What to do