Nortel Networks 9150 - Manual (Page 241)

Remote Gateway 9150 Installation and Administration Guide 211
January 2005 Configuring the Remote Gateway 9150 unit
Bridge Port
!
Click on the Enable option button to give inbound PSTN calls
access to certain PBX features.
!
Click on the Disable option button if you want to support a
telephone on this port.
The default is Disable.
Notes:
!
When configuring Local-only ports on a Remote Gateway
9150 unit, the Bridge Port setting is not available.
!
If a Remote Gateway 9150 unit port is configured with Bridge
Port enabled, do not attach a telephone set to this port.
!
For a telephone set connected to a Remote Gateway 9150 unit
with Local and Remote capability, the Bridge Port does not
need to be enabled to allow you to have access to Bridge Port
features.
Forward Busy/No
Answer
!
Click on the Enable option button to allow incoming calls to
this station to be forwarded if they are not answered by the
number of rings configured in the Number of Rings before
transfer field or if the station is busy.
!
Click on the Disable option button if calls are not to be
forwarded.
The default is Disable.
Forward Busy/No
Answer: Number of
Rings before
transfer Enter the number of times this station rings before transferring the
call to the configured DN.
Note: You must Enable Forward Busy/No Answer to configure
this setting.
The default is four rings.
Field Description