Nortel Networks NN43001-563 - Manual (Page 181)

Installation procedure summary 181
Installation procedure summary
Table 37 "Installation procedures" (page 181) lists the procedures required
to install and configure an IP Trunk 3.01 (and later) node. Complete all
installation and configuration tasks before transmitting the configuration
data to the IP trunk cards.
Table 37
Installation procedures
Step Procedure See
page
1 "Create the IP Trunk 3.01 (and later) Installation Summary Sheet" (page 183) .
2 "Install and cable IP Trunk 3.01 (and later) cards" (page 190) .
"Card installation procedure" (page 190)
3 "Configure IP Trunk 3.01 (and later) data" (page 216) .
"Configure the ISL D-channel on the system for the DCHIP card for IP Trunk
3.01 (and later)" (page 216)
.
"Configure ISDN feature in Customer Data Block" (page 220) .
"Configure Media Card 32-port and ITG-Pentium 24-port trunk cards and units
for IP Trunk Route" (page 225)
.
"Configure dialing plans within the corporate network" (page 228) .
"Disable the Media Card 32-port and ITG-Pentium 24-port trunk cards" (page
234)
.
4 "Configure IP Trunk 3.01 (and later) data in OTM 2.1 (and later)" (page 234) .
"Add an IP Trunk 3.01 (and later) node in OTM 2.1 (and later) manually"
(page 235)
.
"Add an IP Trunk 3.01 (and later) node and configure general node properties"
(page 235)
.
"Single vs. separate TLAN and ELAN subnets" (page 237) .
"Configure card properties" (page 239) .
"Configure DSP profiles for the IP Trunk 3.01 (and later) node" (page 242) .
Nortel Communication Server 1000
IP Trunk Fundamentals
NN43001-563 01.01 Standard
Release 5.0 30 May 2007
Copyright © 2007, Nortel Networks
.