Nortel Networks NN43001-563 - Manual (Page 447)

Remove the NT8D81BA cable 447
Figure 155
Backplane slot designations
Tools list
• Ty-wrap cutter
• Ty-wraps
• Needle-nose pliers
• Slotted screwdriver
Remove the NT8D81BA cable
Follow the steps in Procedure 74 "Removing the NT8D81BA cable" (page
447) to remove the NT8D81BA cable.
Procedure 74
Removing the NT8D81BA cable
Step Action
1 Identify the I/O panel and backplane designation that corresponds
to the LEFT slot of the pair of card slots, viewed from the front, in
which the Media Card 32-port or ITG-Pentium 24-port trunk card
was installed.
2 Disconnect the filter from the I/O panel using a screwdriver and
needle-nose pliers. Retain fasteners.
3 Power down the IPE shelf.
4 Remove the IPE module I/O safety panel.
Nortel Communication Server 1000
IP Trunk Fundamentals
NN43001-563 01.01 Standard
Release 5.0 30 May 2007
Copyright © 2007, Nortel Networks
.