Figure 130 making a gatekeeper zone – Nortel Networks NN43001-563 User Manual

Page 334

Advertising
background image

334

Provisioning IP Trunk 3.01 (and later) in TM 3.1

Figure 130
Making a Gatekeeper zone

All nodes within a network are configured with the IP addresses of the
Primary and Alternate Gatekeepers in that network zone.

Follow the steps in

Procedure 49 "Provisioning the IP Trunk 3.01 (and later)

node to register with the Gatekeeper" (page 334)

to configure the correct

network zone when provisioning an IP Trunk 3.01 (and later) node.

Procedure 49

Provisioning the IP Trunk 3.01 (and later) node to register with the Gatekeeper

Step

Action

1

Configure The IP Trunk 3.01 (and later) node to register with the
IP Peer H.323 Gateway Gatekeeper. This can be done in either
of two ways, as follows:

In the ITG – ISDN IP Trunk window, as seen in

Figure 92

"ITG – ISDN IP Trunk window" (page 302)

, from the menu

select Configuration > Node > Gatekeeper. The ITG Node
Gatekeeper properties
window opens. See

Figure 131 "ITG

Node Gatekeeper Properties window" (page 335)

.

Nortel Communication Server 1000

IP Trunk Fundamentals

NN43001-563

01.01

Standard

Release 5.0

30 May 2007

Copyright © 2007, Nortel Networks

.

Advertising