Nortel Networks NN43001-563 - Manual (Page 244)

244 Install and configure IP Trunk 3.01 (and later) node
Figure 54
DSP Profile Profile Options tab
4 Change the General and FAX option parameters, if required. To
revert to the default settings, click Reset Defaults.
CAUTION
The default DSP Profile Option settings for each codec
are appropriate for most applications. Only an expert in
VoIP should modify the Profile Options parameters.
"IP
Trunk 3.01 (and later) DSP profile settings" (page 162)
5 Click the Codec Options tab. See Figure 55 "DSP Profile – Codec
Options tab" (page 245) . This tab displays the default order of the
preferred codec selection for outgoing calls and shows advanced
codec parameters for the selected codec.
Nortel Communication Server 1000
IP Trunk Fundamentals
NN43001-563 01.01 Standard
Release 5.0 30 May 2007
Copyright © 2007, Nortel Networks
.