Nortel Networks NN43001-563 - Manual (Page 206)

206 Install and configure IP Trunk 3.01 (and later) node
Figure 40
EMC kit deployment
ITG Card ELAN/TLAN Adapter (L-adapter)
The L-adapter routes the signals to the following network interfaces:
• ELAN
• TLAN
• one RS-232 port
On Large Systems, the NT8D81AA cable is used to bring all 24 Tip & Ring
pairs to the I/O panel. The NTCW84JA I/O panel mounting block must
be installed on Large Systems before the ITG Card ELAN/TLAN Adapter
(L-adapter) is installed. Refer to
Figure 41 "ITG card ELAN/TLAN adapter
(L-adapter)" (page 207) on Figure 41 "ITG card ELAN/TLAN adapter
(L-adapter)" (page 207) .
Install the adapter securely to ensure an active connection.
Nortel Communication Server 1000
IP Trunk Fundamentals
NN43001-563 01.01 Standard
Release 5.0 30 May 2007
Copyright © 2007, Nortel Networks
.